ORDA Build 7.0 Training
Operator training resources for the Open RDA (ORDA) Build 7.0 Deployment are available from this page. One copy of the document, "Open RDA Build 7.0 Training ", is included in the ORDA Build 7.0 Deployment Kit. You are encouraged to download and print additional copies, as this document is designed to follow the presentation.
Download document orda7deploy.pdf (3.27 MB)
This is a PDF file. You must have Adobe's Acrobat Reader installed in order to read this document.
Note to NWS Staff:
To receive credit for completing the ORDA Build 7.0 Training, you must take the training module through the DoC E-learning LMS! The links below are for reference only.
The ORDA Build 7.0 presentation is in a streaming format, so no download is required. In continuous playback, it will take about 35 minutes to complete. NOTE: If your browser has the a pop-up blocker enabled, it may prevent some components of this training from working correctly. We suggest that you temporarily disable any pop-up blockers that may be running in your browser.
WDTD welcomes your feedback on how well this training supported your understanding of the operational impacts of ORDA Build 7.0. Please send us your comments! Thanks!
ORDA Operational Impacts
- Improvements in calibration.
- Improved sensitivity in long pulse (VCP 31).
- New clutter suppression technique: Gaussian Model Adaptive Processing (GMAP).
- Differences in Batch elevation Reflectivity data .
- Improvements to the quality of Spectrum Width estimates.
- Differences in elevation angle settling.
- End of first trip velocity less noisy with ORDA.
- Differences in types of RDA Alarms.
- Differences in RDA Performance Data Menus.
- False Alarm at AWIPS.
The ORDA Build 7.0 Release Notes are available from the Radar Operation Center's Open RDA News page.
Download document Final_Chrisman_ray.pdf (2.19 MB)
A First Look at the Operational (Data Quality) Improvements Provided by the Open Radar Data Acquisition (ORDA) System. J.N. Chrisman, C.A. Ray, Radar Operations Center (ROC), Norman, OK.
Implementing ORDA Clutter Suppression
- Bypass Maps will be generated by the ORDA installation team to verify the validity of the map generation process. This will be done under existing conditions and will not likely produce the best quality Bypass Maps.
- Until Bypass Maps can be generated under ideal conditions, sites may apply clutter suppression:
Once ideal conditions exist for the generation of Bypass Maps, see the Bypass Map Generation Guidance document. This provides concise instructions and appropriate parameter settings for Bypass Map generation for both segments.
Once Bypass Maps are generated, clutter filtering with the Bypass Map in control should be used as appropriate to address normal clutter contamination. All Bins suppression should be used to address transient clutter (i.e., AP).
- using All Bins everywhere for Segment 1,
- using All Bins only out to 62 nm for Segment 2.
Sites with hard targets outside the local RDA area (such as mountains) may need to make additional adjustments to their Bypass Maps. There is a Bypass Map range placement error in Build 7.0 that will be fixed in Build 8.0. An explanation of the problem and the appropriate workaround is available here.